1/2" DESICCANT DRYER w/ REGULATOR & GUAGE ASSEMBLY
Product Description
The ELIMINATOR II is designed to Operate only one paint gun.
(Do not attempt to operate multiple paint guns with this unit.)
ProvideS dry, oil-free air to -40°F dew points, virtually free of dried particulate. This unit MUST Be installed as close as possible to the point-of-use and as far as possible from the compressor!
BENEFITS
Continuous Low Dew Point Operation
Easily Maintained and Serviced
Upwards Compressed Air Drying
Built-in Dew Point w/ Indicator
No Desiccant Dust Migration
Low Pressure Drop Design
FEATURES
Removes water, dirt, oil and water vapor
Designed to provide low humidity air
for spraying
Ideally used in prep station and paint booth
Designed for one spray gun
Patented activated carbon element
1st stage
Patented desiccant cartridge with 1 micron final filter in 2nd stage
Tool-less spin on/off element maintenance
Change desiccant in <5 minutes
Automatic drain, 1/4” regulator
Activated carbon for oil vapor removal
Use for waterborne and solventborne
SPECIFICATIONS
Port Size Inlet: ½” - Outlet: ¼”
Thread StyleNPT
Dryer Design Manual, Refrigerated
Recommended Temp 100° F
Maximum Pressure* 150 PSIG
Dryer Capacity -40°F
Filter Capacity 1.0 micron and larger
Flow Capacity Activated Carbon Oil Absorption to 0.003ppm
Differential Pressure 30 SCFM<5.0 PSID at Rated Flow
Height 19.0”
Width 15.0”
Depth 5.0”
Weight 12 lbs
Customers Who Viewed This Item Also Viewed
 | AP-060 - REPLACEMENT ELEMENT - 1ST STAGE |
|  | DE401 - DESICCANT ELEMENT - SECOND STAGE |
|
